Nanocrystalline and Amorphous

High Frequency Power toroidal Amorphous and Nanocrystalline Iron Core

Performance characteristice:

Provided with high saturation magnetization, low iron loss and small coercive force. And better soft magnetic performance in comparison with common electrotechnical (Fe-Si) sheet

Use:

1. Iron core for middle frequency heating power supply

2.Reverse electric welder transformer iron core

3.UPS iron core

4.Power transformer iron core

5.Switching power transformer iron core

6.Iron core for high-energy accelerator

Specification of iron core

Model	Size(mm)			Average Magnetic Path Length(cm)	Effective Section Area Ae (cm²)	Weight W(g)	Applicable Power(20khz)(KW)
Model	d₁	d₂	h	Average Magnetic Path Length(cm)	Effective Section Area Ae (cm²)	Weight W(g)	Applicable Power(20khz)(KW)
TIE-C-AN40	40	60	20	15.70	1.40	150	0.5~0.8
TIE-C-AN41	35	60	25	14.91	2.03	220	0.8~1.2
TIE-C-AN42	50	70	30	18.85	2.04	280	1.2~1.4
TIE-C-AN43	45	80	35	19.63	4.17	600	2.0~3.0
TIE-C-AN44	50	90	30	21.99	4.08	650	2.0~3.5
TIE-C-AN45	40	80	25	18.84	3.4	470	1.8~2.4
TIE-C-AN46	50	100	35	23.56	5.95	1050	4.0~5.0
TIE-C-AN47	40	100	35	21.99	7.14	1140	4.5~6.0
TIE-C-AN48	54	103	30	24.66	5.10	920	3.5~4.0
TIE-C-AN49	75	125	30	31.41	5.10	1160	6.0~10.0
TIE-C-AN50	70	120	25	29.84	4.25	920	3.5~4.0
TIE-C-AN51	85	125	20	32.98	2.72	650	2.0~3.5
TIE-C-AN52	85	125	25	32.98	3.50	840	3.0~4.5
TIE-C-AN53	85	125	30	32.98	4.20	1000	4.0~5.0
TIE-C-AN54	90	130	25	34.55	3.50	570	3.0~4.5
TIE-C-AN55	90	130	30	34.55	4.20	1050	5.0~8.0
TIE-C-AN56	67	142	35	32.82	8.90	2100	10~15
TIE-C-AN57	120	170	25	45.55	4.25	1400	6.0~12
TIE-C-AN58	135	210	35	54.19	8.92	3500	14~20

d1-internal diameter d2-external diameter h-height